Hook Solo - Gear Hoox Wall Storage
RC Raceworx is Proud to introduce the Hook Solo, a Gear Hoox Wall Storage Solution.
Next batch, Batch 2, of kits is shipping the first week of February. Thanks.
Hook Solo is the second product of the Gear Hoox line and constructed from the same great extruded aluminum frame pieces we use for our Dagr Pit Lights.
Light in weight, yet strong in construction, our line of extruded aluminum products allow you to take advantage of wall storage opportunities for a variety of needs. The Hook Solo can also be mounted almost anywhere with a sturdy/supportive anchoring point (wood, plaster, drywall, cement/brick, metal, etc.) Two screws or bolts (not supplied) and you’re ready to organize!
Features:
Sold as Each. One Hook Solo Includes (1) 9” Long Vertical Rail + (1) 8” Long Hook Rail and brackets/hardware.
Comes as a kit so assembly is required. We are working on instructions currently (as of 12-11-22).
20 Series extruded aluminum frame pieces
M5 Hardware - Slide-in T-Nuts, Button Heads and Flat Heads
Compatible with our Carbon Blinger Kit, Blinger Kit is sold separately.
Aluminum mounting brackets
Aluminum corner brackets
Two different hook end-stops included (please see pictures)
Available in clear or black anodize, same price.
Special Features:
The black mounting brackets can slide ‘inboard’ along the main vertical rail in order top optimize mounting. However we suggest running them as close to each end of the vertical to spread the load. These are also counter sunk and have flat head screws to make them as flush as possible. If you are concerned about wall damage from the brackets making contact you can use thick tape or double sided tape with the backing left applied to act as a non-stick buffer.
We include two different stoppers. One is a large corner bracket with the locating tabs machined off and the other is an internal style corner bracket. Choose whichever works best for your use case, or both if multiple items need containment on the hook.
Please Note:
Instructions are coming soon. These are quite easy to assemble if you take your time and familiarize yourself with the hardware and reference the pictures. Early release means you might struggle a little :)
Ensuring each frame piece is pulled into the next with the corner bracket(s) is important. This ensure mating surfaces all touch as much as possible. You may need to slightly loose and-then tighten the bracket(s) while firmly holding them in place in order for the frame and bracket pieces to nest and sit correctly without gaps. Do one bracket/corner at a time and take your time.
Wall anchors/hardware are not included. Since the Hook Solo can be mounted in a variety of ways it would be way too hard for us to include or sell mounting kits for each use case. Thanks.
RC Raceworx is Proud to introduce the Hook Solo, a Gear Hoox Wall Storage Solution.
Next batch, Batch 2, of kits is shipping the first week of February. Thanks.
Hook Solo is the second product of the Gear Hoox line and constructed from the same great extruded aluminum frame pieces we use for our Dagr Pit Lights.
Light in weight, yet strong in construction, our line of extruded aluminum products allow you to take advantage of wall storage opportunities for a variety of needs. The Hook Solo can also be mounted almost anywhere with a sturdy/supportive anchoring point (wood, plaster, drywall, cement/brick, metal, etc.) Two screws or bolts (not supplied) and you’re ready to organize!
Features:
Sold as Each. One Hook Solo Includes (1) 9” Long Vertical Rail + (1) 8” Long Hook Rail and brackets/hardware.
Comes as a kit so assembly is required. We are working on instructions currently (as of 12-11-22).
20 Series extruded aluminum frame pieces
M5 Hardware - Slide-in T-Nuts, Button Heads and Flat Heads
Compatible with our Carbon Blinger Kit, Blinger Kit is sold separately.
Aluminum mounting brackets
Aluminum corner brackets
Two different hook end-stops included (please see pictures)
Available in clear or black anodize, same price.
Special Features:
The black mounting brackets can slide ‘inboard’ along the main vertical rail in order top optimize mounting. However we suggest running them as close to each end of the vertical to spread the load. These are also counter sunk and have flat head screws to make them as flush as possible. If you are concerned about wall damage from the brackets making contact you can use thick tape or double sided tape with the backing left applied to act as a non-stick buffer.
We include two different stoppers. One is a large corner bracket with the locating tabs machined off and the other is an internal style corner bracket. Choose whichever works best for your use case, or both if multiple items need containment on the hook.
Please Note:
Instructions are coming soon. These are quite easy to assemble if you take your time and familiarize yourself with the hardware and reference the pictures. Early release means you might struggle a little :)
Ensuring each frame piece is pulled into the next with the corner bracket(s) is important. This ensure mating surfaces all touch as much as possible. You may need to slightly loose and-then tighten the bracket(s) while firmly holding them in place in order for the frame and bracket pieces to nest and sit correctly without gaps. Do one bracket/corner at a time and take your time.
Wall anchors/hardware are not included. Since the Hook Solo can be mounted in a variety of ways it would be way too hard for us to include or sell mounting kits for each use case. Thanks.
RC Raceworx is Proud to introduce the Hook Solo, a Gear Hoox Wall Storage Solution.
Next batch, Batch 2, of kits is shipping the first week of February. Thanks.
Hook Solo is the second product of the Gear Hoox line and constructed from the same great extruded aluminum frame pieces we use for our Dagr Pit Lights.
Light in weight, yet strong in construction, our line of extruded aluminum products allow you to take advantage of wall storage opportunities for a variety of needs. The Hook Solo can also be mounted almost anywhere with a sturdy/supportive anchoring point (wood, plaster, drywall, cement/brick, metal, etc.) Two screws or bolts (not supplied) and you’re ready to organize!
Features:
Sold as Each. One Hook Solo Includes (1) 9” Long Vertical Rail + (1) 8” Long Hook Rail and brackets/hardware.
Comes as a kit so assembly is required. We are working on instructions currently (as of 12-11-22).
20 Series extruded aluminum frame pieces
M5 Hardware - Slide-in T-Nuts, Button Heads and Flat Heads
Compatible with our Carbon Blinger Kit, Blinger Kit is sold separately.
Aluminum mounting brackets
Aluminum corner brackets
Two different hook end-stops included (please see pictures)
Available in clear or black anodize, same price.
Special Features:
The black mounting brackets can slide ‘inboard’ along the main vertical rail in order top optimize mounting. However we suggest running them as close to each end of the vertical to spread the load. These are also counter sunk and have flat head screws to make them as flush as possible. If you are concerned about wall damage from the brackets making contact you can use thick tape or double sided tape with the backing left applied to act as a non-stick buffer.
We include two different stoppers. One is a large corner bracket with the locating tabs machined off and the other is an internal style corner bracket. Choose whichever works best for your use case, or both if multiple items need containment on the hook.
Please Note:
Instructions are coming soon. These are quite easy to assemble if you take your time and familiarize yourself with the hardware and reference the pictures. Early release means you might struggle a little :)
Ensuring each frame piece is pulled into the next with the corner bracket(s) is important. This ensure mating surfaces all touch as much as possible. You may need to slightly loose and-then tighten the bracket(s) while firmly holding them in place in order for the frame and bracket pieces to nest and sit correctly without gaps. Do one bracket/corner at a time and take your time.
Wall anchors/hardware are not included. Since the Hook Solo can be mounted in a variety of ways it would be way too hard for us to include or sell mounting kits for each use case. Thanks.