RC Raceworx Dagr Pit Light - Portable w/ Folding Aluminum Structure
Now Patented. We have been officially granted a patent for the Dagr by the US Patent Office. Patent Number 11859798. Thank you to those who have supported and continue to support the Dagr.
To view the YouTube Dagr Instructions Playlist, follow this link
!Build Tip!
When using your Dagr you can use the extra internal L brackets as leg locks. These will add additional security so the legs do not collapse unexpectedly if the light is bumped into. The pivots do a good job with this however the locks provide additional security. Please reference the photos above (scroll to the end).
This is a great way to become more familiar with the intricacies and assembly of the Dagr Pit Light! These will be improved as we build more lights for customers. Thanks for understanding.
Introduction to the Dagr Pit Light -
The Dagr was designed as a work light solution that is mobile and utilitarian, it can be used on your workbench at home or in your shop or you can take it on the road. It adds to your usable work area by providing a top deck to store items (more about that below). I have tested the Dagr in my own personal work shop on a 24”x8’ workbench, in our mobile workshop van and at the track on a pit table.
Features:
Height - The Dagr measures 17” from the work-surface to the bottom of the light fixture and an addtional 1-1/4” inches to the Top Deck surface, (19-1/4”)
Width - The inside measurement of the Dagr is 36-7/8” Wide. We designed the Dagr so that it is slightly larger than our Original Pit Mat which measures to 36” Wide.
Foot Print - Overall Depth / Foot Print is 8-1/4” (at the widest points of the feet)
Top Deck - The Dagr will accommodate (2) 8th Scale or (2) 10th Scale RC Cars. We will include 8 Chassis Lugs in the kit. These chassis lugs help keep your cars on the Dagr in case your table or light is bumped. I found that with 2 AE 10th and 8th Scale cars I did not need to move the lugs.
Weight - The Dagr as Sold weighs 4 Lbs 13 Ozs
Overall Length - Overall at its widest points the Dagr measures 42-1/4”
Storage - The Dagr can be folded and strapped with its buckles or your can leave it standing.
Assembly - Assbemly is required as it comes as a kit.
Serialized Name Plate - EVERY Dagr Pit Light WILL come with a serialized name plate. Name plates are made from aluminum that is black anodized and engraved to a unique serial for each light. A hardware pack will be included so you bolt the name plate to your Dagr or keep it on the shelf.
More About the Dagr -
Your Dagr will come in kit form with all of the necessary pieces to assemble. Even an Oops Kit of extra hardware. We will provide an instructional video and are also planning to have supplemental written instructions that follow the video. Simple tools are required for assembly, 2.5mm and 3.0mm hex wrenches (ball and straight end depending on preference), needle nose pliers, measuring device (calipers or measuring tape) and a large flat work area. If you have an RC Raceworx Pit Mat that will help keep your hardware organized!
One notable feature about the folding leg deign for the Dagr is that it is asymmetrical. This allows the user to upgrade to longer legs and not require any other frame modifications to allow for longer legs. At full collapse, each leg will pass by each other, effectively allowing you to run up to 36” long legs. Longer leg upgrades to come later.
Never locking pivots. In order to keep your Dagr reliable we went with a never locking design for the pivots. Each pivot face features a wear bushing that is pre greased. The never locking design allows for the extended life against wear and tare of the pivot. The provided levers will get your pivots tight, but there is no ‘bind’ or locking mechanism. As a side note, the pivots come prebuilt with flat head screws on each side. This seems to help during assembly and we have found provides more of a ‘bind’ on the pivots for those needing a stiffer pivot or those not needing adjusting levers. The adjusting levers are spring loaded to allow for clocking after tight.
The Dagr features a genuine Sylvania 36” LED shop light with fixture. It is operated on/off by a chain switch, has a 120v 2-prong linkable outlet on the opposite end. One very handy feature is the linkable outlet stays hot (live with power) even when you turn off your Dagr. This allows you to continue using that outlet while the light is off. The linkable feature allows you to charge low watt items such as your smart phone or RC transmitter. Or… link another Dagr to yours.
In dry conditions your Dagr is ok to use outside. Keep in mind the light fixture we chose is an indoor fixture so be careful using it outside.
Please always feel free to email us with any questions. Our email is rcdude@rcraceworx.com
What sets the Dagr apart from the competition? What competition? :-D … In all seriousness, like what we say for all of our products, its up to you to decide what sets us apart. Do your research and ask questions, those are you best two tools when deciding, in my opinion.
Thank you all for your enthusiasm and patience with this new release!
Now Patented. We have been officially granted a patent for the Dagr by the US Patent Office. Patent Number 11859798. Thank you to those who have supported and continue to support the Dagr.
To view the YouTube Dagr Instructions Playlist, follow this link
!Build Tip!
When using your Dagr you can use the extra internal L brackets as leg locks. These will add additional security so the legs do not collapse unexpectedly if the light is bumped into. The pivots do a good job with this however the locks provide additional security. Please reference the photos above (scroll to the end).
This is a great way to become more familiar with the intricacies and assembly of the Dagr Pit Light! These will be improved as we build more lights for customers. Thanks for understanding.
Introduction to the Dagr Pit Light -
The Dagr was designed as a work light solution that is mobile and utilitarian, it can be used on your workbench at home or in your shop or you can take it on the road. It adds to your usable work area by providing a top deck to store items (more about that below). I have tested the Dagr in my own personal work shop on a 24”x8’ workbench, in our mobile workshop van and at the track on a pit table.
Features:
Height - The Dagr measures 17” from the work-surface to the bottom of the light fixture and an addtional 1-1/4” inches to the Top Deck surface, (19-1/4”)
Width - The inside measurement of the Dagr is 36-7/8” Wide. We designed the Dagr so that it is slightly larger than our Original Pit Mat which measures to 36” Wide.
Foot Print - Overall Depth / Foot Print is 8-1/4” (at the widest points of the feet)
Top Deck - The Dagr will accommodate (2) 8th Scale or (2) 10th Scale RC Cars. We will include 8 Chassis Lugs in the kit. These chassis lugs help keep your cars on the Dagr in case your table or light is bumped. I found that with 2 AE 10th and 8th Scale cars I did not need to move the lugs.
Weight - The Dagr as Sold weighs 4 Lbs 13 Ozs
Overall Length - Overall at its widest points the Dagr measures 42-1/4”
Storage - The Dagr can be folded and strapped with its buckles or your can leave it standing.
Assembly - Assbemly is required as it comes as a kit.
Serialized Name Plate - EVERY Dagr Pit Light WILL come with a serialized name plate. Name plates are made from aluminum that is black anodized and engraved to a unique serial for each light. A hardware pack will be included so you bolt the name plate to your Dagr or keep it on the shelf.
More About the Dagr -
Your Dagr will come in kit form with all of the necessary pieces to assemble. Even an Oops Kit of extra hardware. We will provide an instructional video and are also planning to have supplemental written instructions that follow the video. Simple tools are required for assembly, 2.5mm and 3.0mm hex wrenches (ball and straight end depending on preference), needle nose pliers, measuring device (calipers or measuring tape) and a large flat work area. If you have an RC Raceworx Pit Mat that will help keep your hardware organized!
One notable feature about the folding leg deign for the Dagr is that it is asymmetrical. This allows the user to upgrade to longer legs and not require any other frame modifications to allow for longer legs. At full collapse, each leg will pass by each other, effectively allowing you to run up to 36” long legs. Longer leg upgrades to come later.
Never locking pivots. In order to keep your Dagr reliable we went with a never locking design for the pivots. Each pivot face features a wear bushing that is pre greased. The never locking design allows for the extended life against wear and tare of the pivot. The provided levers will get your pivots tight, but there is no ‘bind’ or locking mechanism. As a side note, the pivots come prebuilt with flat head screws on each side. This seems to help during assembly and we have found provides more of a ‘bind’ on the pivots for those needing a stiffer pivot or those not needing adjusting levers. The adjusting levers are spring loaded to allow for clocking after tight.
The Dagr features a genuine Sylvania 36” LED shop light with fixture. It is operated on/off by a chain switch, has a 120v 2-prong linkable outlet on the opposite end. One very handy feature is the linkable outlet stays hot (live with power) even when you turn off your Dagr. This allows you to continue using that outlet while the light is off. The linkable feature allows you to charge low watt items such as your smart phone or RC transmitter. Or… link another Dagr to yours.
In dry conditions your Dagr is ok to use outside. Keep in mind the light fixture we chose is an indoor fixture so be careful using it outside.
Please always feel free to email us with any questions. Our email is rcdude@rcraceworx.com
What sets the Dagr apart from the competition? What competition? :-D … In all seriousness, like what we say for all of our products, its up to you to decide what sets us apart. Do your research and ask questions, those are you best two tools when deciding, in my opinion.
Thank you all for your enthusiasm and patience with this new release!
Now Patented. We have been officially granted a patent for the Dagr by the US Patent Office. Patent Number 11859798. Thank you to those who have supported and continue to support the Dagr.
To view the YouTube Dagr Instructions Playlist, follow this link
!Build Tip!
When using your Dagr you can use the extra internal L brackets as leg locks. These will add additional security so the legs do not collapse unexpectedly if the light is bumped into. The pivots do a good job with this however the locks provide additional security. Please reference the photos above (scroll to the end).
This is a great way to become more familiar with the intricacies and assembly of the Dagr Pit Light! These will be improved as we build more lights for customers. Thanks for understanding.
Introduction to the Dagr Pit Light -
The Dagr was designed as a work light solution that is mobile and utilitarian, it can be used on your workbench at home or in your shop or you can take it on the road. It adds to your usable work area by providing a top deck to store items (more about that below). I have tested the Dagr in my own personal work shop on a 24”x8’ workbench, in our mobile workshop van and at the track on a pit table.
Features:
Height - The Dagr measures 17” from the work-surface to the bottom of the light fixture and an addtional 1-1/4” inches to the Top Deck surface, (19-1/4”)
Width - The inside measurement of the Dagr is 36-7/8” Wide. We designed the Dagr so that it is slightly larger than our Original Pit Mat which measures to 36” Wide.
Foot Print - Overall Depth / Foot Print is 8-1/4” (at the widest points of the feet)
Top Deck - The Dagr will accommodate (2) 8th Scale or (2) 10th Scale RC Cars. We will include 8 Chassis Lugs in the kit. These chassis lugs help keep your cars on the Dagr in case your table or light is bumped. I found that with 2 AE 10th and 8th Scale cars I did not need to move the lugs.
Weight - The Dagr as Sold weighs 4 Lbs 13 Ozs
Overall Length - Overall at its widest points the Dagr measures 42-1/4”
Storage - The Dagr can be folded and strapped with its buckles or your can leave it standing.
Assembly - Assbemly is required as it comes as a kit.
Serialized Name Plate - EVERY Dagr Pit Light WILL come with a serialized name plate. Name plates are made from aluminum that is black anodized and engraved to a unique serial for each light. A hardware pack will be included so you bolt the name plate to your Dagr or keep it on the shelf.
More About the Dagr -
Your Dagr will come in kit form with all of the necessary pieces to assemble. Even an Oops Kit of extra hardware. We will provide an instructional video and are also planning to have supplemental written instructions that follow the video. Simple tools are required for assembly, 2.5mm and 3.0mm hex wrenches (ball and straight end depending on preference), needle nose pliers, measuring device (calipers or measuring tape) and a large flat work area. If you have an RC Raceworx Pit Mat that will help keep your hardware organized!
One notable feature about the folding leg deign for the Dagr is that it is asymmetrical. This allows the user to upgrade to longer legs and not require any other frame modifications to allow for longer legs. At full collapse, each leg will pass by each other, effectively allowing you to run up to 36” long legs. Longer leg upgrades to come later.
Never locking pivots. In order to keep your Dagr reliable we went with a never locking design for the pivots. Each pivot face features a wear bushing that is pre greased. The never locking design allows for the extended life against wear and tare of the pivot. The provided levers will get your pivots tight, but there is no ‘bind’ or locking mechanism. As a side note, the pivots come prebuilt with flat head screws on each side. This seems to help during assembly and we have found provides more of a ‘bind’ on the pivots for those needing a stiffer pivot or those not needing adjusting levers. The adjusting levers are spring loaded to allow for clocking after tight.
The Dagr features a genuine Sylvania 36” LED shop light with fixture. It is operated on/off by a chain switch, has a 120v 2-prong linkable outlet on the opposite end. One very handy feature is the linkable outlet stays hot (live with power) even when you turn off your Dagr. This allows you to continue using that outlet while the light is off. The linkable feature allows you to charge low watt items such as your smart phone or RC transmitter. Or… link another Dagr to yours.
In dry conditions your Dagr is ok to use outside. Keep in mind the light fixture we chose is an indoor fixture so be careful using it outside.
Please always feel free to email us with any questions. Our email is rcdude@rcraceworx.com
What sets the Dagr apart from the competition? What competition? :-D … In all seriousness, like what we say for all of our products, its up to you to decide what sets us apart. Do your research and ask questions, those are you best two tools when deciding, in my opinion.
Thank you all for your enthusiasm and patience with this new release!