Stuck Nutz Red Nutz - Thread Locker
A high strength anaerobic threadlocker designed to permanently lock fasteners. Exhibits good temperature and solvent resistance. Performs on aluminum, steel, plated, stainless steel, and special alloy parts.
Recommended Threaded Fastener Sizes: Locks and seals fasteners from up to 1'' in diameter.
Bottle Size: 0.34 oz (10 mL)
Competes With: Loctite® 271™ (271 is a trademark and Loctite is a registered trademark of Henkel IP & Holding GMBH LLC, Germany)
Color: Red
Fixture Time (minutes): 30
Full Cure Time: 24 Hours
Temp Range: -65°F-300°F
Max Gap Fill: 0.007"
Break Away Torque: (in-lbs): 250
Prevailing Off Torque (In-lbs): 250
Warnings: Not recommended for use in pure oxygen, or oxygen rich environments., Not recommended for use with plastics, especially thermoplastics.
A high strength anaerobic threadlocker designed to permanently lock fasteners. Exhibits good temperature and solvent resistance. Performs on aluminum, steel, plated, stainless steel, and special alloy parts.
Recommended Threaded Fastener Sizes: Locks and seals fasteners from up to 1'' in diameter.
Bottle Size: 0.34 oz (10 mL)
Competes With: Loctite® 271™ (271 is a trademark and Loctite is a registered trademark of Henkel IP & Holding GMBH LLC, Germany)
Color: Red
Fixture Time (minutes): 30
Full Cure Time: 24 Hours
Temp Range: -65°F-300°F
Max Gap Fill: 0.007"
Break Away Torque: (in-lbs): 250
Prevailing Off Torque (In-lbs): 250
Warnings: Not recommended for use in pure oxygen, or oxygen rich environments., Not recommended for use with plastics, especially thermoplastics.
A high strength anaerobic threadlocker designed to permanently lock fasteners. Exhibits good temperature and solvent resistance. Performs on aluminum, steel, plated, stainless steel, and special alloy parts.
Recommended Threaded Fastener Sizes: Locks and seals fasteners from up to 1'' in diameter.
Bottle Size: 0.34 oz (10 mL)
Competes With: Loctite® 271™ (271 is a trademark and Loctite is a registered trademark of Henkel IP & Holding GMBH LLC, Germany)
Color: Red
Fixture Time (minutes): 30
Full Cure Time: 24 Hours
Temp Range: -65°F-300°F
Max Gap Fill: 0.007"
Break Away Torque: (in-lbs): 250
Prevailing Off Torque (In-lbs): 250
Warnings: Not recommended for use in pure oxygen, or oxygen rich environments., Not recommended for use with plastics, especially thermoplastics.