Wall Ride - Gear Hoox RC Car Wall Storage System
RC Raceworx is Proud to introduce the Wall Ride, a Gear Hoox Wall Storage Solution.
Next batch, Batch 2, of kits is shipping the first week of February. Thanks.
Wall Ride is the first product of the Gear Hoox line and constructed from the same great extruded aluminum frame pieces we use for our Dagr Pit Lights.
Light in weight, yet strong in construction, our line of extruded aluminum products allow you to take advantage of wall storage opportunities for a variety of needs. The Wall Ride can also be mounted almost anywhere with a sturdy/supportive anchoring point (wood, plaster, drywall, cement/brick, metal, etc.) Two screws or bolts (not supplied) and you’re ready to organize!
Originally designed to store RC cars, you can hang/store pretty much anything on the Wall Ride. Be creative!
Features:
Sold as Each. One Wall Ride Includes (2) 22” Long Vertical Rails + (2) 15” Long Hook Rails + (4) 6” Hook Legs and brackets/hardware.
Comes as a kit so assembly is required. We are working on instructions currently (as of 12-11-22).
20 Series extruded aluminum frame pieces
M5 Hardware - Slide-in T-Nuts, Button Heads and Flat Heads
Compatible with our Carbon Blinger Kit, Blinger Kit is sold separately.
Aluminum mounting brackets
Aluminum corner brackets
Four hook end-stops included. These are large corner brackets with one side machined (please see pictures)
Available in clear or black anodize, same price.
Special Features:
The black mounting brackets can slide ‘inboard’ along the main vertical rail in order top optimize mounting. However we suggest running them as close to each end of the vertical to spread the load. These are also counter sunk and have flat head screws to make them as flush as possible. If you are concerned about wall damage from the brackets making contact you can use thick tape or double sided tape with the backing left applied to act as a non-stick buffer.
One set of large corner brackets are included as stops for the hook legs. These are the same as the other brackets for the frame, however feature one side machined. Please do not use the machined brackets on the frame!
Please Note:
Instructions are coming soon. These are quite easy to assemble if you take your time and familiarize yourself with the hardware and reference the pictures. Early release means you might struggle a little :)
Ensuring each frame piece is pulled into the next with the corner bracket(s) is important. This ensure mating surfaces all touch as much as possible. You may need to slightly loose and-then tighten the bracket(s) while firmly holding them in place in order for the frame and bracket pieces to nest and sit correctly without gaps. Do one bracket/corner at a time and take your time.
Wall anchors/hardware are not included. Since the Wall Ride can be mounted in a variety of ways it would be way too hard for us to include or sell mounting kits for each use case. Thanks.
RC Raceworx is Proud to introduce the Wall Ride, a Gear Hoox Wall Storage Solution.
Next batch, Batch 2, of kits is shipping the first week of February. Thanks.
Wall Ride is the first product of the Gear Hoox line and constructed from the same great extruded aluminum frame pieces we use for our Dagr Pit Lights.
Light in weight, yet strong in construction, our line of extruded aluminum products allow you to take advantage of wall storage opportunities for a variety of needs. The Wall Ride can also be mounted almost anywhere with a sturdy/supportive anchoring point (wood, plaster, drywall, cement/brick, metal, etc.) Two screws or bolts (not supplied) and you’re ready to organize!
Originally designed to store RC cars, you can hang/store pretty much anything on the Wall Ride. Be creative!
Features:
Sold as Each. One Wall Ride Includes (2) 22” Long Vertical Rails + (2) 15” Long Hook Rails + (4) 6” Hook Legs and brackets/hardware.
Comes as a kit so assembly is required. We are working on instructions currently (as of 12-11-22).
20 Series extruded aluminum frame pieces
M5 Hardware - Slide-in T-Nuts, Button Heads and Flat Heads
Compatible with our Carbon Blinger Kit, Blinger Kit is sold separately.
Aluminum mounting brackets
Aluminum corner brackets
Four hook end-stops included. These are large corner brackets with one side machined (please see pictures)
Available in clear or black anodize, same price.
Special Features:
The black mounting brackets can slide ‘inboard’ along the main vertical rail in order top optimize mounting. However we suggest running them as close to each end of the vertical to spread the load. These are also counter sunk and have flat head screws to make them as flush as possible. If you are concerned about wall damage from the brackets making contact you can use thick tape or double sided tape with the backing left applied to act as a non-stick buffer.
One set of large corner brackets are included as stops for the hook legs. These are the same as the other brackets for the frame, however feature one side machined. Please do not use the machined brackets on the frame!
Please Note:
Instructions are coming soon. These are quite easy to assemble if you take your time and familiarize yourself with the hardware and reference the pictures. Early release means you might struggle a little :)
Ensuring each frame piece is pulled into the next with the corner bracket(s) is important. This ensure mating surfaces all touch as much as possible. You may need to slightly loose and-then tighten the bracket(s) while firmly holding them in place in order for the frame and bracket pieces to nest and sit correctly without gaps. Do one bracket/corner at a time and take your time.
Wall anchors/hardware are not included. Since the Wall Ride can be mounted in a variety of ways it would be way too hard for us to include or sell mounting kits for each use case. Thanks.
RC Raceworx is Proud to introduce the Wall Ride, a Gear Hoox Wall Storage Solution.
Next batch, Batch 2, of kits is shipping the first week of February. Thanks.
Wall Ride is the first product of the Gear Hoox line and constructed from the same great extruded aluminum frame pieces we use for our Dagr Pit Lights.
Light in weight, yet strong in construction, our line of extruded aluminum products allow you to take advantage of wall storage opportunities for a variety of needs. The Wall Ride can also be mounted almost anywhere with a sturdy/supportive anchoring point (wood, plaster, drywall, cement/brick, metal, etc.) Two screws or bolts (not supplied) and you’re ready to organize!
Originally designed to store RC cars, you can hang/store pretty much anything on the Wall Ride. Be creative!
Features:
Sold as Each. One Wall Ride Includes (2) 22” Long Vertical Rails + (2) 15” Long Hook Rails + (4) 6” Hook Legs and brackets/hardware.
Comes as a kit so assembly is required. We are working on instructions currently (as of 12-11-22).
20 Series extruded aluminum frame pieces
M5 Hardware - Slide-in T-Nuts, Button Heads and Flat Heads
Compatible with our Carbon Blinger Kit, Blinger Kit is sold separately.
Aluminum mounting brackets
Aluminum corner brackets
Four hook end-stops included. These are large corner brackets with one side machined (please see pictures)
Available in clear or black anodize, same price.
Special Features:
The black mounting brackets can slide ‘inboard’ along the main vertical rail in order top optimize mounting. However we suggest running them as close to each end of the vertical to spread the load. These are also counter sunk and have flat head screws to make them as flush as possible. If you are concerned about wall damage from the brackets making contact you can use thick tape or double sided tape with the backing left applied to act as a non-stick buffer.
One set of large corner brackets are included as stops for the hook legs. These are the same as the other brackets for the frame, however feature one side machined. Please do not use the machined brackets on the frame!
Please Note:
Instructions are coming soon. These are quite easy to assemble if you take your time and familiarize yourself with the hardware and reference the pictures. Early release means you might struggle a little :)
Ensuring each frame piece is pulled into the next with the corner bracket(s) is important. This ensure mating surfaces all touch as much as possible. You may need to slightly loose and-then tighten the bracket(s) while firmly holding them in place in order for the frame and bracket pieces to nest and sit correctly without gaps. Do one bracket/corner at a time and take your time.
Wall anchors/hardware are not included. Since the Wall Ride can be mounted in a variety of ways it would be way too hard for us to include or sell mounting kits for each use case. Thanks.